How Use Rain Detector Alert ?

Rain Detector With Alarm in Hindi (हिंदी)||Home Automation|Buzzer|Arduino|

Hello Everyone,I have shown IoT(Internet of things) Project in this video,to make your own smart home then you should have the following kit such as

1. Rain Detector

2. Arduino Uno R3

3. Male Famale Wire

4. Buzzer

5. Power Supply

To buy such equipment you can go to the amazon app or any other electronic site.

Subscribe Us to learn cool IoT and Make Your Own

           Diagram 

° Instructions

To use the Rain Detector,You need to connect the Circuit as it is in the diagram,You Can Change Buzzer Sound.Here we can use rain detector to stop the motor after filling in the water tank of our house.

First Of all you need to download Arduino Software From Website As per requirement based on your Windows.

         Copy This Code

// Created By Tec Support //Support Youtube Channel for More Vedio - https://www.youtube.com/@tecsupportsagar const int raindropSensorPin = A0; // analog input pin used for the raindrop sensor const int buzzerPin = 7; // digital output pin used for the buzzer const int ledPin = 8; // digital output pin used for the LED light void setup() { pinMode(buzzerPin, OUTPUT); // set the buzzer pin to output mode pinMode(ledPin, OUTPUT); // set the LED pin to output mode Serial.begin(9600); // initialize serial communication } void loop() { int raindropValue = analogRead(raindropSensorPin); // read the analog value from the raindrop sensor Serial.println(raindropValue); // print the raindrop value to the serial monitor (optional) if (raindropValue < 600) { // if the raindrop value is less than 600 (adjust this threshold to suit your sensor) digitalWrite(buzzerPin, HIGH); // turn on the buzzer digitalWrite(ledPin, HIGH); // turn on the LED light } else { digitalWrite(buzzerPin, LOW); // turn off the buzzer digitalWrite(ledPin, LOW); // turn off the LED light } delay(100); // add a small delay to avoid rapid triggering }

If  not Copy The Code Than Download Code Click Here