Automatic Water Dispenser, | Ardino and Ultrasonic Sensor, | Project. | IoT

 Automatic Water Dispenser, | Arduino and Ultrasonic Sensor, | Project. | IoT

#4

*Need Modules in This Project Like, -

1. Arduino UNO R3 (If  You Have Another Arduino than You Can Use)

3. Ultrasonic Sensor

3. 1 Chanel Relay Modules

4. 12 v DC Water Motor

5.  Water Pump 

* Step By Step Setup

1. Make a box using Cardboard.

2. Join the circuit as shown in video

*Copy This Code

// Title - Automatic Water Dispenser Using Ultrasonic sensor project with Relay and Arduino // I Hope You Like It, // Creator By "TEC Support" // Support Your YouTube Channel - https://www.youtube.com/channel/UCOiqJqzFG4WtA7tLMBC55Ew // Visit Webside for More Information - https://tecsupportsagar.blogspot.com // Download Ardino Software - https://downloads.arduino.cc/arduino-ide/nightly/arduino-ide_nightly-20221116_Windows_64bit.zip // Defines Pins Numbers const int trigPin = 9; //"Trig" Connect To the Ardino Pin 9 const int echoPin = 10; //"Echo" Connect To the Ardino Pin 10 const int relay = 11; //"IN"(Relay) Connect To the Ardino Pin 11 const int ledPin = 13; //"+" (LED) Connect To the Ardino Pin 13 // Project by - "Tec Support" // Title - Automatic Water Dispenser Using Ultrasonic sensor project with Relay and Arduino // Defines Variables long duration; int distance; int safetyDistance; void setup() { pinMode(trigPin, OUTPUT); // Sets the trigPin as an Output pinMode(echoPin, INPUT); // Sets the echoPin as an Input pinMode(relay, OUTPUT); pinMode(ledPin, OUTPUT); Serial.begin(9600); // Starts the serial communication } void loop() { // Clears the trigPin digitalWrite(trigPin, LOW); delayMicroseconds(2); // Sets the trigPin on HIGH state for 10 micro seconds digitalWrite(trigPin, HIGH); delayMicroseconds(10); digitalWrite(trigPin, LOW); // Reads the echoPin, returns the sound wave travel time in microseconds duration = pulseIn(echoPin, HIGH); // Calculating the distance distance= duration*0.034/2; safetyDistance = distance; if (safetyDistance <= 5) // You can change safe distance from here changing value Ex. 20 , 40 , 60 , 80 , 100, all in cm { digitalWrite(relay, LOW); digitalWrite(ledPin, HIGH); } else{ digitalWrite(relay, HIGH); digitalWrite(ledPin, LOW); } // Prints the distance on the Serial Monitor Serial.print("Distance: "); Serial.println(distance); } // Project by - "Tec Support" // Title - Automatic Water Dispenser Using Ultrasonic sensor project with Relay and Arduino

If the coding is not being copied then download the code by clicking on the download button given below.

Click Here For Download

* After Uploading The Code in Arduino, Then Connect The  Modules as Shown in Diagram

If  You Like This Project Then Like, Share and Subscribe Your Channel.

Thank You For Your Love and Support